Product Care


Solid Timber



Cranfields prides itself on using solid timber and quality leather for its natural character and texture. Given the nature of these materials, there are some things you can do to ensure it ages well.

A monthly wipe with a soft damp cloth will remove any dust buildup. Rather than concentrating on one localised area, be sure to wipe down the whole surface. The use of table mats is advised, and do not use any corrosive detergents or silicon based product like Pledge.  Do not drag furniture as this places stress on the joints and when removing objects from the surface lift rather than sliding to prevent any surface damage.

A yearly polish with a good quality bee’s wax is recommended to keep the timber supple and fed.

 

Keep Out of Direct Sunlight



We highly recommend our furniture is not put in direct exposure to sunlight and heat, as this may cause the colour to fade unevenly over time.

Also, avoid any extreme temperature and climate changes. Every care has been taken in construction to normalise the wood to allow for expansion and contraction of the timber without any overall movement. However, it is essential that the furniture’s’ environment is stabilised as much as possible, eg. avoiding direct heat sources like radiators and sunlight.

 

Keep Dry



Moisture is an important factor in many climates and extended exposure to moisture can deteriorate leather and timbers.Should the product get wet, remove any residual water immediately and allow to dry naturally.

 

Leather Care



Leather upholstery in a normal home environment should require little attention and cleaning should only be done when necessary.

For regular maintenance, dust or vacuum occasionally, or in hot, dry weather, use a soft, slightly damp cloth, and wipe gently without rubbing. If the leather starts to feel overly dry, we recommend you apply a small amount of Pelle leather conditioner with a cotton cloth, allow the leather to dry, then polish gently with a dry cotton cloth. This will restore the natural feel and suppleness of the leather.

Should the product get wet, remove any residual water immediately with a paper towel and allow to dry naturally.

If you have a spillage on your leather upholstery, immediately dab off excess liquids and solids, always work from the edge of the stain inward to avoid spreading. Do not use an abrasive cloth or rub excessively. Then contact a specialist leather cleaning company for advice.

In transit they may develop minor wrinkles and compression marks, these are completely natural and will diminish in the first month or normal use.

 

Pewter Care



Modern pewter is non-toxic and very stable, so a perfect material for use with food and drink, as well as for decorative objects. Cosi Tabellini pewter is made of tin, copper and antimony only - it is completely lead-free and food-safe, and is approved by both the EU and US Food & Drug Administration (FDA).

Please note that pewter has an extremely low melting point (less than 200C), so it should never placed in an oven, microwave or exposed to a naked flame, or any other direct heat source.

Unlike silver, it tarnishes very slowly, so requires minimal attention to keep it looking attractive. Gradually a natural patina will build up, enhancing the beauty, by softening the already gentle lines, adding warmth and character to the object. To maintain this natural look, Cosi Tabellini suggest that you:

Dust the item with a brush:

Lightly swab the surface of the item with methylated spirits to remove marks

Rub the item gently with a soft cloth or chamois leather

For display pieces only, apply a wax coating to help protect them

If, however, a polished shiny look is preferred, almost any metal polish will do, and blemishes can be removed by simply rubbing gently in small circular motions with '0000' grade extra-fine steel wool. In the case of scratches, you can employ a slightly abrasive paste, such as those used to polish the bodywork of cars.

As with any object used for food or drink, pewter needs to be washed thoroughly before first use, and then subsequently with warm water and a mild, preferably liquid, detergent, and it is suggested that delicate glassware and stemware should only be ever hand-washed this way.

Objects made from a combination of glass, or ceramic, and pewter should not be left to stand in water, as prolonged immersion could weaken the bond between the materials. It is better to dry the pewter straight away, as standing water can pit the surface of the pewter. It is also worth remembering that pewter is porous, so please do not allow food or drink to dry into the pewter.

Tableware and flatware can be washed in a dishwasher, but only on the lowest temperature setting (definitely not the extreme temperatures of a commercial machine) using liquid dishwasher soap. If you live in an area of hard water, however, a dishwasher is not recommended unless your house is equipped with a water softener, as it may tarnish and/or pit the pewter. Please let your pewter cool before removing it from the dishwasher to spare your fingertips and save your fingerprints!